Great Plains 9756PP Parts Manual - Manual (Page 77)

Revision Comments Part Description Part No. Ref.
Image No. 00741 dwg
48 INCH FROG 580-003H 1.
Models 9540, 9752 & 9756 48" FROG W/XTRA HOLES 580-012H 2.
Models 9322 HHCS 1-8X6 GR5 802-357C 3.
Models 9326, 9533 & 9540 HHCS 1-8X7 GR5 802-075C 3.
Models 9744, 9748, 9752 & 9756 HHCS 1-8X8 GR5 802-076C 3.
WASHER FLAT 1 USS PLT 804-028C 4.
NUT HEX LOCK 1-8 PLT 803-316C 5.
HHCS 3/4-10X6 GR5 802-070C 6.
WASHER LOCK SPRING 3/4 PLT 804-023C 7.
NUT HEX 3/4-10 PLT 803-027C 8.
PP SWEEP 48X4 1/2 HARDFACE TOP PW0328 9.
Optional PP SWEEP 48X6 1/2 HARDFACE TOP PW0432 9.
PLOW BOLT, 7/16" x 1 1/2" #3 170724 10.
WASHER FLAT 7/16 USS PLT 804-204C 11.
NUT HEX LOCK 7/16-14 PLT 803-200C 12.
RIPPER MOUNTING BRACKET 580-047H 13.
RIPPER SHANK PLAINS PLOW 580-363D 14.
HHCS 1-8X3 1/2 GR5 802-169C 15.
NUT HEX 1-8 NYLON INSERT PLT 803-038C 16.
Replace only with Gr. 5 or less HHCS 5/8-11X3 GR5 802-059C 17.
WASHER LOCK SPRING 5/8 PLT 804-022C 18.
NUT HEX 5/8-11 PLT 803-021C 19.
RIPPER POINT 4' BLADE 580-046H 20.
3/8X2ROLLPIN" 250632 21.
Includes items 20 & 21 RIPPER POINT 4' BLD W/ROLL PIN 580-159V 22.
Includes items 13 thru 21 RIPPER SHANK ASSEMBLY 582-009K 23.
02/17/14 - 77 - 580-043P
Table of Contents Part Number Index
Section 5: V-Blade & Coulter
V-Blade & Optional Ripper Assembly
(Applies to 9322PP, 9326PP, 9533PP, 9540PP, 9744PP, 9748PP, 9752PP, 9756PP only)