Great Plains 9756PP Parts Manual - Manual (Page 35)

Revision Comments Part Description Part No. Ref.
Image No. 00738 dwg
DEPTH CONTROL BAR BRACKET 580-081H 1.
Models 9322, 9326, 9533 & 9540 DEPTH STOP SLIDE BAR - 9500 580-247D 2.
Models 9744, 9748, 9752 & 9756 DEPTH STOP SLIDE BAR - 9700 580-125D 2.
PIN CLEVIS 1 X 3 3/8 USABLE 805-351C 3.
WASHER MACH 1.5X1.00X.075 804-192C 4.
PIN COTTER 3/16 X 2 805-058C 5.
HHCS 1/2-13X3 GR5 802-039C 6.
WASHER LOCK SPRING 1/2 PLT 804-015C 7.
NUT HEX 1/2-13 PLT 803-020C 8.
Cartridge # 3C7272 HYD VALVE DEPTH CONTROL CROSS 810-511C 9.
CROSS CART. ASSY FOR 810-511C 3C7272 9.
WASHER LOCK SPRING 5/16 PLT 804-009C 10.
HHCS 5/16-18X2 GR5 802-115C 11.
DEPTH STOP SLIDE 580-011H 12.
3/8X1 3/4 T-HANDLED SCREW 575-569H 13.
PLUNGER - DEPTH CONTROL 580-002H 14.
SPRING COMP .75OD .125W 2.63LG 807-216C 15.
WASHER FLAT 1/2 USS PLT 804-017C 16.
PIN ROLL 1/8 X 1 3/8 PLT 805-226C 17.
Includes Items 12 thru 17 DEPTH STOP CONTROL ASSEMBLY 580-010S 18.
HHCS 3/8-16X2 GR5 802-143C 19.
NUT LOCK 3/8-16 PLT 803-013C 20.
02/17/14 - 35 - 580-043P
Table of Contents Part Number Index
Section 4: Hydraulics
Hydraulic Depth Control Assembly (S/N 1040EE-)
(Applies to 9322PP, 9326PP, 9533PP, 9540PP, 9744PP, 9748PP, 9752PP, 9756PP only)