Great Plains 9756PP Parts Manual - Manual (Page 31)

Revision Comments Part Description Part No. Ref.
Image No. 00984 dwg
(Center Single) 9744 & 9752 AXLE SPINDLE 2.5X15.5 Q45-8B 580-376D 16.
(Center W. Beam) 9744, 48, 52, 56 BRACKET PART 580-236D 16.
(Center W. Beam) 9744, 48, 52, 56 DEPTH STOP SLIDE BAR - 9500 580-247D 16.
HUB SEAL Q458 (TCM 223063TB-H) 816-529C 17.
820-293C 1.78ID LM603049 822-169C 18.
BRG CUP 3.06OD LM603011 822-168C 19.
ZERK GREASE STRAIGHT 1/8-27MPT 800-130C 20.
HUB 458 W/CUPS 8-BOLTS 8" BC 815-229C 21.
BEARING CUP LM-67010 822-020C 22.
BEARING CONE LM-67048 822-021C 23.
WASHER FLAT 3/4 HARD USS 804-008C 24.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 25.
NUT HEX SLOTTED 3/4-16 803-053C 26.
GREASE CAP 2.448X1.12X.25 890-781C 27.
HUB STUD 5/8-18X2 1/2 GR5 802-182C 28.
NUT LUG 5/8-18 X 90 DEG PLT 803-219C 29.
Includes Items 16 thru 29 (Center
Single) Models 9744 & 9752
HUB 8-BOLT SPNDL 2.5X15.5 458 815-285C 30.
Includes Items 16 thru 29 (Center
Walking Beam) 9744, 48, 52 & 56
HUB 8-BOLT SPNDL 2.25X16.5 458 815-226C 30.
Includes Items 16 thru 29 (Center
Walking Beam) 9744, 48, 52 & 56
HUB 8-BOLT SPNL 2.25X13.25 458 815-277C 30.
02/17/14 - 31 - 580-043P
Table of Contents Part Number Index
Section 3: Transport
8-Bolt Hub & Spindle Assembly (S/N 1055EE+)
(Applies to 9322PP, 9326PP, 9533PP, 9540PP, 9744PP, 9748PP, 9752PP, 9756PP only)