Great Plains CALIBRATION CRANK Assembly Instructions - Manual

Great Plains Mfg., Inc.
© Copyright 2005 Printed
Used with:
Update Instructions
152-302M
706/1006NT, 605NT, 3P605NT,
3P500/3P500V, 3P600
Calibration Crank Kit
• 706 End Wheel No-Till
• 1006 End Wheel No-Till
• 605NT
• 3P605NT
• 3P500/3P500V
• 3P600
General Information
These instructions explain how to install the calibration
crank kit. This kit uses a crank handle for calibration.
This allows for calibration in the field.
These instructions apply to:
152-300A 706/1006NT Calibration Kit
152-301A 605NT Calibration Kit
152-303A 3P605NT Calibration Kit
152-305A 3P600 Calibration Kit
152-306A 3P500/3P500V Calibration Kit
Manual Update
Refer to the 706/1006NT, 605NT, 3P605NT, 3P500/
3P500V, or 3P600 operator’s manual and seed rate
book for detailed information on safely operating, ad-
justing, troubleshooting and maintaining the calibration
crank. Refer to the parts manual for part identification. A
copy of the updated parts manual is available through
706/1006NT 152-300A Assembly Instructions
Install Calibration Handle Stob
Refer to Figure 1
1. Choose a location on frame of drill to
weld the calibration handle stob.
NOTE: Be sure to choose an out of the way
location as the calibration handle stob
stores the calibration crank when it is not in
use.
2. Grind paint at location on frame where
calibration handle stob is to be welded.
3. Weld calibration handle stob on frame.
4. Repaint portion of frame.
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
10/4/2005
your Great Plains dealer.
150-285M 706/1006NT Operator’s Manual
150-285P 706/1006NT Parts Manual
151-061M 605NT/3P605NT Operator’s Manual
151-061P 605NT/3P605NT Parts Manual
118-794M 3P500/3P500V/3P600 Operator’s Manual
118-794P 3P500/3P500V/3P600 Parts Manual
Before You Start
Page 3 is a detailed listing of parts included in the Calibra-
tion Crank Kit update. Use this list to inventory parts
received.
Tools Required
• Basic Hand Tools
• Welder
• DA Grinder
23384
Figure 1
Calibration Crank on Storage Stob