Great Plains 8030P G1022 Operator Manual - Manual (Page 6)

3
Important Safety Information
5/2/07 60303P and 80303P Three-Point Planter 401-008M-A
Great Plains Mfg., Inc.
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-230C
Red Reflectors
Rear of planter toolbar, both ends;
two reflectors total
12356
818-055C
Slow Moving Vehicle Emblem 12414
818-230C
Red Reflectors
Rear of row units on outside ends;
two reflectors total
17920