Great Plains 8030P G1022 Operator Manual - Manual (Page 39)

36
Section 6 Options
60303P and 80303P Three-Point Planter 401-008M-A 5/2/07
Great Plains Mfg., Inc.
Marker Attachment
The planter markers are ground-marking, disk units that
can be mounted on the right, left or both sides of the plant-
er. When mounted on both ends, the controls can be on
separate hydraulic circuits or plumbed together through a
sequence valve.
For more information, refer to Marker Operation, “Operat-
ing Instructions,” page 10, Marker Adjustments, “Adjust-
ments,” page 23, “Troubleshooting,” page 25, and
Lubrication, “Maintenance and Lubrication,” page 28.
To order markers for your planter, contact your Great
Plains dealer.
Bundle Order Part Number
6-Row 30" Flat Fold Marker 113-428K
8-Row 30" Flat Fold Marker 113-432K
Monitor
The DICKEY-john
®
Monitor Option is a micro-processor-
based, planter-monitoring system. If seed is not going to
the ground, the monitor will sound and indicate which row
unit has stopped planting. The system also provides infor-
mation for seed spacing, seed population, area, ground
speed and projected area per hour.
To order the monitor, contact your Great Plains dealer.
Bundle Part Number
DICKEY-john 1000, 6-Row 403-047K
DICKEY-john 3000 with Radar, 6-Row 403-063K
DICKEY-john 3000 without Radar, 6-Row 403-049K
DICKEY-john 1000, 8-Row 403-050K
DICKEY-john 3000 with Radar, 8-Row 403-064K
DICKEY-john 3000 without Radar, 8-Row 403-051K
15848
Heavy Duty Spring Package
Heavy-duty springs are available to provide more down
pressure on the row unit. Heavy-duty springs provide be-
tween 155 and 245 pounds of down pressure.
To adjust spring down pressure, refer to Down Pressure,
“Adjustments,” page 20.
To order heavy-duty springs for your row units, contact
your Great Plains dealer.
Package Part Number
Heavy-Duty Spring Package 406-006S
17729
17927