beautypg.com

Cadillac 2008 CTS User Manual

Page 209

background image

Press the customization button until Remote Door
Unlock appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the menu up/down button to scroll through
the following settings:

Lights Off: The exterior lamps will not flash when you
press the unlock button on the transmitter.

Lights On (default): The exterior lamps will flash when
you press the unlock button on the transmitter.

No Change: No change will be made to this feature.
The current setting will remain.

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.

Delay Door Lock

This feature allows you to select whether or not the
locking of the vehicle’s doors will be delayed. When
locking the doors with the power door lock switch and a
door is open, this feature will delay locking the doors
until five seconds after the last door is closed. You will
hear three chimes to signal that the delayed locking
feature is in use. On vehicles with the Remote Keyless
Entry (RKE) system, the key must be out of the

ignition for this feature to work. On vehicles with the
Keyless Access System, the vehicle must be off and the
keyless access transmitter must be removed from the
vehicle for this feature to work. You can temporarily
override delayed locking by pressing the power
door lock switch twice or the lock button on the
transmitter twice. See Delayed Locking on page 2-18 for
more information.

Press the customization button until Delay Door Lock
appears on the DIC display. Press the set/reset
button once to access the settings for this feature. Then
press the menu up/down button to scroll through the
following settings:

Off: There will be no delayed locking of the
vehicle’s doors.

On (default): The doors will not lock until five seconds
after the last door is closed.

No Change: No change will be made to this feature.
The current setting will remain.

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.

3-71