Transport machinery safely, Avoid high pressure fluids – Great Plains CF600 Operator Manual User Manual
Page 5

2012-04-20
506-582M
3
Important Safety Information
Transport Machinery Safely
▲
Comply with state and local laws.
▲
Maximum transport speed for implement is 20
mph. DO NOT EXCEED. Never travel at a
speed which does not allow adequate control
of steering and stopping. Some rough terrains
require a slower speed.
▲
Sudden braking can cause a towed load to
swerve and upset.
▲
Do not tow a sprayer that, when fully loaded,
weighs more than 1.5 times the weight of the
towing vehicle.
▲
Do not transport sprayer when filled with
chemicals.
▲
Carry reflectors or flags to mark boom and
sprayer in case of breakdown on the road.
▲
Keep clear of overhead power lines and other
obstructions when transporting. Refer to trans-
port dimensions under “Specifications and
Capacities,” page 32.
▲
Do not fold or unfold the boom while the trac-
tor is moving.
Avoid High Pressure Fluids
▲
Escaping fluid under pressure can penetrate
the skin, causing serious injury.
▲
Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.
▲
Use a piece of paper or cardboard, NOT
BODY PARTS, to check for suspected leaks.
▲
Wear protective gloves and safety glasses or
goggles when working with hydraulic systems.
▲
If an accident occurs, see a doctor immedi-
ately. Any fluid injected into the skin must be
surgically removed within a few hours or gan-
grene may result.