Great Plains CF600 Operator Manual - Manual (Page 16)

CF500 and CF600
506-582M 2012-04-20
14
Owner Assistance
If you need customer service or repair parts, con-
tact your Great Plains dealer. They have trained
personnel, repair parts and equipment specially
designed for Great Plains products.
Refer to Figure 1
Your boom’s parts were specially designed and
should only be replaced with Great Plains parts.
Always use the serial and model number when or-
dering parts from your Great Plains dealer.
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with the
service received, please take the following
actions.
1. Discuss the matter with your dealership ser-
vice manager. Make sure they are aware of
any problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
3. For further assistance write to:
Product Support
Service Department
Great Plains Mfg. Inc.
PO Box 5060
Salina, KS 67402-5060
Figure 1
Serial Number Plate
16972