Wheatheart Remote PowerSwing - Manual (Page 15)

W HEATHEART - R EMOTE P OWERSWING 4. M AINTENANCE
A232, A233, A234, A235, AND A236 MODELS
30664 R0 15
4. Maintenance
The Remote Powerswing can be exposed to some poor conditions during normal
usage. Following the annual maintenance schedule of the electronic components
below will assure a long life of operation.
1. Open the junction box and check for corrosion and assure all connections
are tight (see Figure 5.1).
2. Use an air gun to blow any dust and dirt out of the box.
3. Reapply
corrosion-inhibiting paste as needed to the terminals.
4. Open the steel receiver housing and inspect for corrosion, dust, and dirt.
5. Open the plastic receiver and inspect, checking the circuit board for
corrosion.
6. Use an air gun to blow any dust or dirt from the housing and reassemble.
Note: Batteries may need to be inspected and/or replaced. Most hardware and general
retail stores can identify the battery type and carry replacements.