Monarch Instrument Rugged Temp User Manual
Page 2
Rev: 0.92 06/22/11
Serial Communication: The logger has a mini USB port. Plug the cable into this port and the
other end into the USB port on your PC/Laptop. The included software needs to be installed in
order to work with the logger.
Battery: Replace the battery as needed with a high temperature 3.6V Lithium - Tadiran TLH-
5902 or similar rated to 125°C. Use a coin to remove the battery cover (counterclockwise). Insert
the battery POSITIVE END first as shown in the diagram below:
See also other documents in the category Monarch Instrument Equipment:
- F2A1X (8 pages)
- ACT-1B Series (8 pages)
- ACT-2A (16 pages)
- F2A3X (6 pages)
- Phasar-Tach (6 pages)
- PLT200 (42 pages)
- PLT200 (14 pages)
- POCKET-TACH 100 (6 pages)
- Pocket-Tach Plus Kit h Plus Kit (10 pages)
- PT99 (18 pages)
- Remote Contact Assembly (1 page)
- TACH-4A (8 pages)
- DC1250 (43 pages)
- MVS Frequency Controller (2 pages)
- MVS 115 (2 pages)
- MVS Audio (1 page)
- MVS Interconnect (1 page)
- Nova-Strobe DBL (28 pages)
- Nova-Strobe BBL (8 pages)
- Nova-Strobe BB (6 pages)
- Nova Strobe DB Plus (8 pages)
- Nova-Strobe bax (30 pages)
- Nova-Strobe dax (42 pages)
- PALM STROBE (24 pages)
- Phaser-Strobe (10 pages)
- Phaser-Strobe pbx (44 pages)
- Vibration Strobe (8 pages)
- Nova-Strobe vbx (18 pages)
- Pocket LED Strobe (24 pages)
- DC 2000 (160 pages)
- DC6000 (121 pages)
- Track-It USB (1 page)
- Track-It USB Loggers with Display (2 pages)
- Track-It Quick Start (2 pages)
- Track-It USB Logger without Display (2 pages)
- Track-It Pressure Temperature Logger (2 pages)
- Track-It RFID Quick Start (2 pages)
- Android Application (12 pages)
- RFID LOGGER (13 pages)
- RFID LOGGER (3 pages)
- AG-500 (4 pages)