Monarch Instrument Phaser-Strobe - Manual (Page 4)

8.0 BATTERY AND POWER SUPPLY SPECIFICS .................... 10
8.1 Displaying Battery Charge Percentage ............................................ 10
8.2 Low Battery Indication ..................................................................... 10
8.3 Charging the Batteries ..................................................................... 10
8.4 External Power Supply/Charger ....................................................... 10
8.5 Battery Disposal............................................................................... 11
9.0 SPECIFICATIONS ................................................................ 12
10.0 OPTIONS AND ACCESSORIES .......................................... 13
13
10.0 OPTIONS AND ACCESSORIES
C-4040 Set of mating 1/8 inch (3.5mm) male phone plugs for external input / output
CA-4044-6 6 foot (1.8M) input / output cable, 1/8 inch (3.5mm) male phone plug to male
BNC connector
CA-4045-6 6 foot (1.8M) input / output cable, 1/8 inch (3.5mm) male phone plug to 1/8
inch (3.5mm) male phone plug for daisy chaining strobes together
CC-7 Latching carrying case for Strobe with provision for accessories
PSC-3 AC Power Supply/Charger, 115 VAC - 50/60 Hz; Allows continuous operation
from AC mains or charges batteries
PSC-4 Same as above except 230 Vac - 50/60 Hz
R-5 Standard recharger, 115 Vac - 50/60 Hz (14 hour)
R-6 Same as above except 230 Vac - 50/60 Hz
L-1903 Digital Stroboscope replacement lamp
SPC-1 Splash proof Protective Cover for battery model Stroboscopes
ROS-5P Remote Optical Sensor with 8 foot (2.5 m) cable for triggering strobe
T-5 Reflective tape. 5 foot (1.5 m) roll, 0.5 inch wide
MT-190P Magnetic Sensor/Amplifier with 8 foot (2.5 m) cable for triggering strobe
IRS-5P Infrared Sensor for use without reflective target at 0.5 inch (12 mm) gap with 8
foot (2.5 m) cable for triggering strobe
RLS-5P Remote Laser Sensor with 8 foot (2.5 m) cable for triggering strobe