Dymo LabelManager 150 - Manual (Page 6)

Only one style can be used at a time. Styles
can be used with all alphanumeric characters
and most symbols. See “Adding Symbols” for
more information on printing symbols.
To set the font style
1. Press the Style key.
2. Use the arrow keys to move to the desired
style and then press OK.
Framing Your Text
You can further highlight your text by choosing a
frame or underline style. A label can be underlined
or enclosed in a box, but not both together. The
styles available are shown in Figure 7.
Figure 7
To set the frame style
1. Press the Frame/Align key.
2. Use the arrow keys to move to the desired
frame style and then press OK.
On two-line labels, both lines are underlined.
However, both lines are enclosed in a single
box for the box styles.
Creating Two-Line Labels
You can create two-line labels using 9 mm or
12 mm) label tape. 6 mm labels are limited to
one line.
To create a two-line label
1. Type the text for the first line, and press
Return. A new line character is placed at
the end of the first line in the display, but
will not print on the label.
2. Type the text for the second line.
3. Press Print.
Using Symbols and
Special Characters
Symbols and other special characters can be
added to your labels.
Adding Symbols
The complete symbol set as shown in Figure 8.
Figure 8
To add a symbol
1. Press Symbol. The first row of symbols
shown in the table appears in the display.
2. Use the arrow keys to move to the desired
symbol. The left and right arrows scroll
horizontally along the row of symbols.
The up and down arrow keys scroll
vertically through the rows of symbols.
To quickly see a row of symbols, you can
press the letter corresponding to the row
you want.
3. When you locate the desired symbol, press
OK to add the symbol to your label text.
6
LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 6