ClearOne CHAT 150 Quick Start - Manual (Page 8)

CHAT 150 Group Speakerphone
6
USING THE CHAT 150
ChAt 150 Led i
ndiCAtors
The three microphone LED indicators illuminate blue when the CHAT
150 microphones are active. The indicators illuminate red when the
microphones are muted.
The seven volume LED indicators illuminate blue to indicate the current
volume setting—more lights indicate higher volume.
v
oLume
& m
ute
B
uttons
Use the Volume Up/Down buttons (indicated by a large dot and a small
dot) to adjust the volume level of the CHAT 150. Holding down either
button will change the volume rapidly.
Use the Mute button to mute the CHAT 150’s microphone until the Mute
button is pressed again. If you are using the CHAT 150 with a PC, you
can also use the Speaker Volume Control in Windows, as well as the
CHAT software to adjust the volume and mute the microphone.