Cisco ONS 15600 User Manual
Page 9
11-9
Cisco ONS 15600 Procedure Guide, R5.0
February 2008
Chapter 11 Change Card Settings
NTP-E66 Modify Line and Status Thresholds for Optical Ports
Step 7
Click the Thresholds subtab. The default selection is Near End, 15 Min, and Line (
).
Figure 11-1
Provisioning Thresholds for the OC-48 Card
Step 8
As needed, complete the following:
a.
Click Line, Section, Path, or Physical to provision the line, section, path, and physical options in
for each OC-N port.
b.
Change the selection to Near End/Far End, 15 Min/1Day as necessary.
c.
Click Refresh to view or modify the thresholds for each selection.