ClearOne CHAT 50 Quick Start - Manual (Page 6)

CHAT 50 Group Speaker Phone
4
USING THE CHAT 50
ChAt 50 Led i
ndiCAtors
The three microphone LED indicators illuminate blue when the CHAT 50
microphones are active. The indicators illuminate red when the micro-
phones are muted.
The seven volume LED indicators illuminate blue to indicate the current
volume setting—more lights indicate higher volume.
V
oLume
& m
ute
B
uttons
Use the Volume Up/Down buttons (indicated by a large dot and a small
dot) to adjust the volume level of the CHAT 50. Holding down either but-
ton will change the volume rapidly.
Use the Mute button to mute the CHAT 50’s microphone until the Mute
button is pressed again. If you are using the CHAT 50 with a PC, you can
also use the Speaker Volume Control in Windows, as well as the CHAT
50 software to adjust the volume and mute the microphone.