beautypg.com

ClearOne MAX Wireless Quick Start User Manual

Max™ wireless quick start guide

background image

Getting Started Guide

MAX WIRELESS SETUP

To Connect and Charge the Battery Pack

1. Slide the cover off the battery compartment on the bottom of the pod.
2. Insert the battery pack plug into the connector inside the battery compartment, then place

the battery in the compartment.

3. Replace the battery compartment cover.

To Connect the Base Unit

1. Connect one end of the telephone cable into the phone jack on the back of the base unit

and the other end into a wall jack.

2. Connect a recording device to the 2.5mm audio jack (optional).
3. Connect the power cord to the base unit and plug it into an electrical outlet.

MAX™ wireless QUiCK sTArT GUiDe

CLEARONE DOCUMENT 800-158-002-00

(REVISION 1.0) September 2007.

ClearOne Communications, Inc. 5225 Wiley Post Way, Suite 500, SLC, UT 84119 • 1-800-283-5936 • U.S. Patent No. D499,392 • Other
Patents Pending • © 2007 ClearOne Communications, Inc. All rights reserved. Information in this document is subject to change without notice.

TEChNICAL SUPPORT

Telephone:

1-800-283-5936 (United States)

1-801-974-3760

Fax:

1-801-977-0087

E-mail:

[email protected]

CAUTION:

Read the Safety Information in the user manual.

ACCESSINg PROgRAMMINg MENUS

Press and hold

until

appears on the LCD screen. Then press the key that

corresponds with the desired menu option and follow the instructions below.