Front panel, Rear panel, Clc usage – ClearOne PANVP700 User Manual
Page 2
2
NS-0106-7149, Addendum
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
PANVP700
Addendum
Front Panel
The front of the PANVP700 supports the following interfaces:
IR In - Connects to a PAN6400 IR receiver.
IR Out - Connects an IR emitter to the video source.
Pb/Pr - Connects to component display devices.
Y/Composite - Lets you connect composite or component display devices and digital audio to the PAN6400 using a
yellow or green RCA connector.
S-Video lets you connect S-Video to a display.
Rear Panel
The back panel of the PANVP700 includes:
CLC - this is an expansion slot for maximizing signal processing based on the distance the cable runs from the PANVP700
to the PAN6400. The operation is handled by inserting the CLC card closest to the length of cable you are running (see
Table 2). CLC cards come in 50 ft, 250 ft, 500 ft, 750 ft, and 1000 ft allotments (included with your PANVP700). The
250-ft CLC card is pre-inserted for your convenience.
See Figure 2 for an example of how to insert a CLC card into the PANVP700.
Figure 2
CLC card (insertion)
Table 1
CLC Usage
CLC Card
Covers a Cable Length of
50
1 to 50 feet
250
51 to 250 feet
500
251 to 500 feet
750
501 to 750 feet
1000
751 to 1000 feet