Network infrastructure pre-qualification checklist – ClearOne StreamNet Network Infrastructure Pre-Qualification User Manual
Page 3
Review IP IGMP Query and Election processes before configuring switches
Review Switch Uplinks to ensure Bandwidth requirements are met for overall system design
Calculate the needed Multicast Address Table requirements for overall system design
10/100BASE-T auto-sensing Fast Ethernet switching ports
IGMP v2 or v3 support
IP IGMP v2 or v3 Querying
IP IGMP v2 or v3 Snooping
Multicast support with Filtering
IP Routing
100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
10 Gigabit Ethernet uplink modules for Multiple Switch Configuration
IGMP v2 or v3 support
IP IGMP v2 or v3 Querying
IP IGMP v2 or v3 Snooping
Multicast support with Filtering
IP IGMP Immediate-Leave or Fast-Leave implementation
Jumbo Frame of 4096 or greater
IP Routing
Spanning Tree Rapid Mode or Disabled
10/100BASE-T auto-sensing Fast Ethernet switching ports
Recommended Gigabit uplink ports for multiple switches in network Configuration
IGMP v2 or v3 support
IP IGMP v2 or v3 Querying
IP IGMP v2 or v3 Snooping
Multicast support with Filtering
IP IGMP Immediate-Leave or Fast-Leave implementation
IP Routing
Spanning Tree Rapid Mode or Disabled
Global Switch and Uplinks requirements
StreamNet Audio-Only System
StreamNet Audio Video System (Uncompressed)
StreamNet Motion XT Audio Video System (Compressed Video 60mb, 45mb, 30mb, 15mb)
Network Infrastructure Pre-Qualification Checklist
802-000-000-03 Rev 1.0 October 11, 2011