ClearOne VIEW Pro Quick Start - Manual (Page 3)

QUICK-START GUIDE
1
THE VIEW PRO ENCODER AND DECODER
The VIEW Pro E120 encoder takes digital video and audio from source
devices, such as receivers, cable boxes or DVRs, and makes the source
available anywhere on the StreamNet IP network. The VIEW Pro D110
decoder takes the combined video and audio stream, decodes it, and
then sends the video and audio to a display such as a HDTV or projector
and sound system.
IMPORTANT: The VIEW Pro E120 encoder and D110 decoder can
only be used with a StreamNet network configured using StreamNet
Dealer Setup software.
The latest version of the StreamNet Dealer Setup software can be found
on the ClearOne website at:
http://www.clearone.com/resources#enterprise_streaming
QUICK-START OVERVIEW
These steps must be done in the following order to use the VIEW Pro
encoders and decoders in your StreamNet network:
1. Mounting the Encoder/Decoder.
2. The Encoder/Decoder in Network
3. Connecting the Encoder/Decoder
4. Configuring the Encoder/Decoder.