ClearOne VIEW Pro Quick Start - Manual (Page 11)

QUICK-START GUIDE
9
CONFIGURING THE ENCODER/DECODER
The VIEW Pro Encoder/Decoder is configured for use in the commercial
or residential network using the StreamNet Dealer Setup program.
StreamNet Dealer Setup is a PC-based program that allows you to
configure devices so that they can communicate across a StreamNet
network. Phases of the software setup include:
•
Opening the existing project
• Add the new device
• Configuring the device with system-specific information regarding
Display Outputs, Controls, IP and GPIO
• Saving the project
• Sending the configuration files to the server
These steps involved in these processes are detailed in the DigiLinX
Dealer Setup manual available for viewing or download at www.
ClearOne.com.
Information specific to the VIEW Pro Encoder is contained in the VIEW
Pro - E120 Digital AV Encoder Installation and Users Manual available
for viewing or download at www.ClearOne.com.
Information specific to the VIEW Pro Decoder is contained in the VIEW
Pro - D110 Digital AV Decoder Installation and Users Manual available
for viewing or download at www.ClearOne.com.