ClearOne StreamNet Anthology Media Server - Manual (Page 7)

Chapter 2: ANTHOLOGY Media Server Setup 4
Chapter 2: ANTHOLOGY Media Server Setup
This chapter provides an overview of using the Remote Configuration Utility to configure the
ANTHOLOGY media server.
Once you have made all the necessary connections, turn on the ANTHOLOGY media server by
pressing the power button on the back of the unit once. You should see that the blue power LED
illuminates.
Wait 5 minutes for your server to completely boot up the first time, or if your server is connected to
a video display, until the “Now Playing” screen shows on the display.
THE REMOTE CONFIGURATION UTILITY
The ANTHOLOGY media server has a built in web server that provides for remote device configuration,
control system integration, and remote control of playback.
After connecting the ANTHOLOGY to the network, use the Dealer Setup program to discover the
ANTHOLOGY’s IP Address. Then enter into a browser on the same network the IP address followed
by “/config” to enter the remote configuration menu. (You can also look up the IP address of the
server using the DHCP client table in your router’s interface or a command prompt on a connected
pc, if necessary.)
You may also enter through a link provided in the Dealer Setup program.
Once you have connected to the web server’s configuration page, you will see several tabs for
configuring the various features of the ANTHOLOGY media server.