Clarion VRX6671Z - Manual (Page 33)

VRX6671z
37
P1 to P6, and press the ENT at the center of
the JOYSTICK
¡ to call corresponding P.EQ
pattern. In this display, pressing the No. but-
ton in correspondence to the PRESET buttons
# can also call the P.EQ pattern.
∗
After selecting P1 to P6 by operating the JOY-
STICK
¡ , press the ENT at the center of the
JOYSTICK ¡ for 2 seconds or longer to copy
the selected pattern to the USER pattern.
∗
Operate the JOYSTICK ¡ rightward or left-
ward to select “EDIT”, and press the ENT at
the center of the JOYSTICK
¡ to show P.EQ
adjusting display, in which the properties of
currently selected pattern can be adjusted.
∗
By pressing the BAND button % in BASIC pat-
tern selecting display or USER pattern selec-
tion/memory display you can switch between
the two patterns, BASIC and USER.
5. Operate the JOYSTICK ¡ rightward or left-
ward to select “MENU”, and press the ENT at
the center of the JOYSTICK
¡ to return to
the AUDIO-MODE display.
Setting and storing P.EQ Properties/
Memory into USER Pattern
1. In the Basic adjustment display or in the User
setting display, press the A-M button & to
show the AUDIO-MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “EDIT”, and press the ENT at
the center of the JOYSTICK
¡ to show the
P.EQ adjusting display.
3. Select an item to be adjusted by operating
the JOYSTICK ¡ rightward or leftward in the
P.EQ adjusting display.
4. Operate the JOYSTICK ¡ upward or down-
ward to set each adjusting value.
∗
By pressing the PRESET buttons # once in
the P.EQ adjusting display, the setting value for
currently stored USER pattern is obtained.
5. After making adjustments to a desired pat-
tern by repeating the operations of items 3
and 4, operate the JOYSTICK
¡ rightward
or leftward to move the cursor to “RTN”, and
press the ENT at the center of the JOYSTICK
¡
to change over to the BASIC/USER pat-
tern selection/memory display.
6. Operate the JOYSTICK ¡ rightward or left-
ward in the BASIC/USER pattern selection/
memory display to select USER memory P1
to P6 to be stored, and press the ENT at the
center of the JOYSTICK
¡ for 2 seconds or
longer to store the adjusted P.EQ pattern to
the USER memory.
JOYSTICK ¡ for 2 seconds or longer to store
the adjusted S.EQ pattern to the USER memory.
∗
By pressing the PRESET buttons # 1 to 6 for
2 seconds or longer in the S.EQ adjusting dis-
play, the S.EQ pattern can be stored in the
USER memory.
7. To set a title of the stored USER pattern, op-
erate the JOYSTICK ¡ rightward or leftward
to select “TITLE” and press the ENT at the
center of the JOYSTICK
¡ to change into the
Title Input display.
∗
For title inputting method, refer to the section
“Entering titles”.
8. Operate the JOYSTICK ¡ rightward or left-
ward to select “MENU” and press the ENT at
the center of the JOYSTICK
¡ to change into
the AUDIO-MODE display.
Professional mode/P.EQ opera-
tions
P.EQ effect ON/OFF
∗
The factory default setting is “ON”.
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “P.EQ ON/OFF”, “ON” and
“OFF” items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “ON” or “OFF” and press the
ENT at the center of the JOYSTICK
¡ to set
it.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ operations” is not reflected in the
music source.
Calling P.EQ BASIC Pattern/USER
Pattern
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “P.EQ MODE”. “BASIC” and
“USER” items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select the item thus called, and press
the ENT at the center of the JOYSTICK
¡ to
show BASIC pattern selecting display or
USER pattern selection/memory display.
4. In the pattern selecting display, operate the
JOYSTICK ¡ rightward or leftward to select
DSP operations