Quoizel SLM8306AC Salem - Manual (Page 5)

Figure 8
STEP 5 Install Bulb and Bulb Shield
-
A. Install standard bulb with a standard screw base.
Maximum 60 watts.
B. Insert bulb and screw properly into place.
C. Close the Door by placing the Bolt onto the Bolt Holder.
Figure 7
Bolt
Bolt Holder
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
5of6
Assembly Instruction Sheet #IS-SLM8306AC
For Style SLM8306AC
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
September2012
Bulb
Socket
Mounting
Screw
Figure 9
STEP 6 Apply Silicone Sealer to Mounting
Screws
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
Screws (B) and then install them onto the mounting
Hole on the side of inner
(A). Wipe off
excess caulk.
Backplate