beautypg.com

Error displays, English – Clarion DXZ865MP User Manual

Page 43

background image

280-8336-00

English

DXZ865MP

43

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.

ERROR 2

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR P

ERROR R

AMP GUARD

Error Display

Measure

A DISC is caught inside the CD deck and is
not ejected.

A DISC cannot be played due to scratches,
etc.

A DISC is loaded upside-down inside the
CD deck and does not play.

A DISC inside the CD changer is not
loaded.

A DISC inside the CD changer cannot be
played due to scratches, etc.

A DISC inside the CD changer cannot be
played because it is loaded upside-down.

A DISC inside the DVD changer cannot be
played.

A DISC cannot be played due to scratches,
etc.

A DISC inside the DVD changer cannot be
played because it is loaded upside-down.

Parental level error

Region code error

The speaker protection circuit is operating.
During this operation, if any volume
operation is performed, the display shows
AMP GUARD”.
AMP GUARD” sometimes functions when
special test signals are used.

This is a failure of CD deck’s mechanism and
consult your store of purchase.

Replace with a non-scratched,
non-warped-disc.

Eject the disc then reload it properly.

This is a failure of CD changer’s mechanism
and consult your store of purchase.

Replace with a non-scratched, non-warped
disc.

Eject the disc then reload it properly.

This is a failure of DVD mechanism and con-
sult your store of purchase.

Retry or replace with a non-scratched, non-
warped-disc.

Eject the disc then reload it properly

Set the correct Parental level.

Eject the disc and replace correct region
code disc.

1. Turn down sound volume. Function can

also be restored by turning the power off
and on again.
(Speaker volume is reduced automatically
when the speaker protection circuit oper-
ates).

2. If the sound is muted again, consult our

service department.

CD/MP3/WMA

DVD changer

CD changer

Cause

If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.

General