Clarion DXZ865MP - Manual (Page 10)

10
DXZ865MP
280-8336-00
English 5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Press the [ Q] button to open the DCP.
2. Move the DCP detaching slider to the
“RELEASE” side.
3. Push and slide the DCP upward to remove.
∗ The MOTORIZED FACE without DCP
closes automatically in a few seconds.
CAUTION
• Do not try to remove or attach while
driving.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• If you purchased a replacement DCP, an
electrical adjustment is necessary.
This adjustment requires technical
knowledge.
Please consult Clarion service or a Clarion
service station.
Attaching the DCP
1. Place the DCP to the MOTORIZED FACE,
adjusting the metal connecters on DCP and
the MOTORIZED FACE.
2. Press the DCP until it clicks into the
MOTORIZED FACE.
* The DCP display lights and is ready to use.
3. Move the DCP detaching slider to the
“LOCK” side.
CAUTION
• If the slider is on the [RELEASE] side and
the DCP is not locked into place, it may fall
out from vibration of the car. This can break
the DCP, so after removing it, either firmly
reattach it on the unit or put it in its DCP
case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.