Quoizel PWL8307WT Powell - Manual (Page 3)

INSTALLATION INSTRUCTIONS
STYLE NUMBER: PWL8307WT
3 OF 4
STEP 5:
a. Place the Shade inside of the Cage, seat on the Shade
Holder. Line up the (2) Holes on Tabs and (2) Mounting
Holes on the Backplate. Secure by threading the Lock
Screws into the Mounting Holes. Hand-tighten until
snug.
Backplate
Mounting Hole
Shade
Holder
Lock Screw
Shade
Cage
Tab
EXTERIOR GRADE
CAULK
MOUNTING BALL
STEP 6:
a. Refer to the following information for caulking instructions:
With the OUTDOOR FIXTURE properly installed in accordance with supplied Assembly/installation instructions,
proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and FIXTURE BACKPLATE are free to dirt to caulking. Using
EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATE and follow contour, were the FIXTURE
BACKPLATE meets the EXTERIOR WALL SURFACE upward. Proceed to caulk over top of backplate and down
other side.
to ensure proper moisture drainage.
DO NOT CAULK BOTTOM OF FIXTURE BACKPLATE
For assemble the MOUNTING BALLS, please note that
you are required to apply a small amount of Silicone
sealer to the threaded side of the MOUNTING BALLS
and then install them onto the MOUNTING SCREWS.