Installation instructions, Step 6 – Quoizel NN8311WT Nolan User Manual
Page 3
INSTALLATION INSTRUCTIONS
3 OF 3
EXTERIOR GRADE
CAULK
MOUNTING BALL
STEP 6
:
a Refer to following information for caulking instructions
.
:
For assemble the MOUNTING BALLS please note that
you are required to apply a small amount of Silicone
sealer to the threaded side of the MOUNTING BALLS
and then install them onto the MOUNTING SCREWS
,
.
EXTERIOR GRADE
CAULK
OUTDOOR
FIXTURE BACKPLATE
EXTERIOR WALL SURFACE
With the OUTDOOR FIXTURE properly installed in accordance with supplied Assembly/installation
instructions, proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and FIXTURE BACKPLATE are free to dirt to caulking.
Using EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATE and follow contour, were
the FIXTURE BACKPLATE meets the EXTERIOR WALL SURFACE upward. Proceed to caulk over top of
backplate and down other side.
to ensure proper
moisture drainage.
DO NOT CAULK BOTTOM OF FIXTURE BACKPLATE
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
STYLE NUMBER NN8309WT,NN8311WT
: