Quoizel MRE8406WT Marine - Manual (Page 6)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2013 QuoizelInc.
6of6
Assembly Instruction Sheet #IS-MRE8406WT
For Style MRE8406WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
STEP 7 Attach Cage to Fixture Body
-
A. Pass the Bolt on the top of Cage (I) though the Hole on
the Fixture Body (F),place the Washer (J) over the Bolt,
secure by thread the Lock Ball (K) onto the Bolt on the
top of Cage (I). Hand tighten until snug.
Cag and the Bolt in the hood in a
line.
Please make
sure the gap on the e
Figure 8
STEP 8 Apply Silicone Sealer to Backplate
-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your fixture is now assembled and ready to use.
Enjoy!
Exterior
Grade Caulk
Outdoor Fixture
Backplate
Exterior Wall Surface
Figure 9
June2013
Mounting
Ball
Cage
Fixture Body
Lock Ball
Hole
Bolt
Washer
Bolt
Gap