Quoizel MBH8407PN Marblehead User Manual

Page 2

2of2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2014 QuoizelInc.

February2014

MBH8407PN

PART NUMBER

G3840SH

NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2

REPLACEMENT PART DESCRIPTION

GLASS CLEAR SEEDY

REQ.

NO.

FINISH: PALLADIAN BRONZE

White wire

from supply

Ribbed side wire
from fixture

Black wire from
supply (or Red)

Smooth side wire
from fixture

Ground wire

from supply

Ground wire
from fixture

Figure 4

fixture.

E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Figure 5

STEP 5

Install Fixture Body

A. Carefully tuck all wires into the outlet

box and position the backplate of
fixture body (A) over the outlet box.
Align the holes in the backplate with
the mounting screws. Place caulk (not
supplied) into the previously removed
mounting balls and then attach fixture
body (A) using the mounting balls.
Hand tighten until snug.

Figure 6

STEP 6

- Install Bulb

A. This fixture uses standard bulb with medium

base . Maximum 100 watts.

B. Insert bulb and screw snugly into place.

Bulb

Figure 7

STEP 7

- Apply Silicone Sealer

A. Make sure exterior wall surface

and fixture backplate are free of
dirt before applying caulk. Using
exterior grade caulk, caulk over
top of backplate and down other
side. Do not caulk bottom of
fixture backplate to ensure proper
moisture drainage.

Your fixture is now assembled and

ready to use. Enjoy!

Backplate

Fixture can only be
mounted in the
direction indicated

(1) 100W

Bulbs

(Not Supplied)

Medium

Base

Mounting

Ball

Mounting
Screw

Socket

Exterior
Grade
Caulk

6.5”

8”

7” Dia.

11”

4.5”