Quoizel HCE8509IBFL Hillcrest - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
3of7
Figure 1
STEP 2
- Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 1
- Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the backplate of the Fixture Body (H).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
Fixture
Body
Assembly Instruction Sheet #IS-HCE8409IBGU
For Style HCE8409IBGU
Mounting
Screw
Crossbar
Lock Washer
Hex Nut
Figure 2
Crossbar
Outlet Box
Outlet Box
Screw
Mounting Hole
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Figure 3
STEP 3
- Attach panel to Cage
A. Insert Panels (J) into the Slot in the bottom of the Cage (I)
properly.
B . Line up the hole on the Tabs (K) and the Mounting Hole on
the top of Cage (I). By using screwdriver threading the
Lock Screws (F) to secure the Panels (J). Tighten until
snug.
January2012
Panel
Tab
Lock Screw
Cage
Slot
Mounting
Hole