Quoizel COR8412K Cooper User Manual

Page 2

2of2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2014 QuoizelInc.

Aprial2014

COR8412K

PART NUMBER

NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2

REPLACEMENT PART DESCRIPTION

REQ.

NO.

(1)Medium Base

150W bulb

(not supplied)

FINISH: MYSTIC BLACK

STEP 4

Install Fixture Body

A. Carefully tuck all wires into the outlet box and position the backplate

of Fixture Body (A) over the outlet box. Pass the Nipple (CC)
through the holes on the backplate of the Fixture Body (A). Place
caulk (not supplied) into the previously removed Lock Ball (EE) and
then attach Fixture Body (A) using the Lock Ball (EE). Hand tighten
until snug.

Figure 5

STEP 5

Install Bulb

A. This fixture uses standard bulb with medium

base. Maximum 150 watts.

Insert bulb and screw snugly into place.

Bulb

Figure 6

STEP 6

- Apply Silicone Sealer

A. Make sure exterior wall surface

and fixture backplate are free of
dirt before applying caulk. Using
exterior grade caulk, caulk over
top of backplate and down other
side. Do not caulk bottom of
fixture backplate to ensure proper
moisture drainage.

Your fixture is now assembled and

ready to use. Enjoy!

Exterior
Grade Caulk

Backplate

Fixture can only be
mounted in the
direction indicated

Figure 4

9.5” Dia.

13”

8.5”

24”

7”

6”

GND

2.4mm
13Ga

QUOIZEL