Quoizel CCR8408CU Chancellor - Manual (Page 6)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2013 QuoizelInc.
6of6
Assembly Instruction Sheet #IS-CCR8408CU
For Style CCR8408CU
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
STEP 8 Install Bulb -
A. This fixture uses candelabra bulbs with a candelabra
screw base. Maximum 60 watts.
B. Insert bulb and screw properly into place.
Figure 9
Bulb
Socket
July2013
Figure 8
STEP 7 - Attach Fixture Body to Mounting
Screw
A. Place the Backplate of the Fixture Body (F) over the
Mounting Screws (B). Place caulk (not supplied) into
threads of Mounting Balls (E) and thread them onto the
Mounting Screws (B). Hand tighten until snug.
Mounting
Screw
Mounting Ball
Backplate
STEP 9 Apply Silicone Sealer to Backplate -
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, caulk over top of backplate and down
other side. Do not caulk bottom of fixture backplate to
ensure proper moisture drainage.
Your fixture is now assembled and ready to use. Enjoy!
Exterior
Grade Caulk
Outdoor Fixture
Backplate
Exterior Wall Surface
Figure 10