Quoizel COR1914K Cooper - Manual

EXTERIOR GRADE
CAULK
EXTERIOR GRADE
CAULK
OUTDOOR
FIXTURE BACKPLATE
EXTERIOR WALL SURFACE
WALL SURFACE MOUNTED OUTDOOR FIXTURE
CAULKING INSTRUCTIONS
1 Refer to FIGURE2 For assemble the MOUNTING BALLS please note that you are
required to apply a small amount of Silicone sealer to the threaded side of the
MOUNTING BALLS and then install them onto the MOUNTING SCREWS
2 (Refer to FIGURE1
.( ) ,
.
. ) With the OUTDOOR FIXTURE properly installed in accordance with
supplied Assembly/installation instructions, proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and FIXTURE BACKPLATE are free to dirt to
caulking. Using EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATE and
follow contour, were the FIXTURE BACKPLATE meets the EXTERIOR WALL SURFACE
upward. Proceed to caulk over top of backplate and down other side.
to ensure proper moisture drainage.
DO NOT CAULK
BOTTOM OF FIXTURE BACKPLATE
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
IS 727
Revised 2008 01 31
-
- -
MOUNTING BALL
FIGURE1
FIGURE2