Quoizel CTE8306IB Captree User Manual

Page 4

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2013 QuoizelInc.

4of4

Assembly Instruction Sheet #IS-CTE8306IB

For Style CTE8306IB

Figure 5

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

STEP 4 - Attach Fixture Body to Mounting

Screw

A. Place the backplate of Fixture Body (F) over the

Mounting Screws (B). Place caulk (not included) into
threads of Mounting Balls (E) and thread them onto the
Mounting Screws (B). Hand tighten until snug.

Mounting
Screw

Mounting Ball

Backplate

July2013

STEP 5

Install Bulb

Put the Plastic Suction Cup (

onto the MR16 - GU10

Bulb as shown.

B. Install the MR16 - GU10 Bulb into the Socket by

aligning the pins on the Bulb with the keyholes in the
Socket. Once they are aligned, gently push the MR16 -
GU10 Bulb into the keyholes and twist the MR16 - GU10
Bulb to lock it in place

C. Remove the Plastic Suction Cup (H) from the MR16 -

GU10 Bulb.

Figure 6

MR16 Bulb

Socket

Plastic Suction Cup

STEP 6

Apply Silicone Sealer

A. Make sure exterior wall surface and backplate of

fixture are free of dirt before applying caulk. Using
exterior grade caulk, caulk over top of backplate and
down other side. Do not caulk bottom of backplate of
fixture to ensure proper moisture drainage.

Your fixture is now assembled and ready to use. Enjoy!

Exterior
Grade Caulk

Outdoor Fixture
Backplate

Exterior Wall Surface

Figure 7