Quoizel UPBY8701WT Uptown Bowery - Manual (Page 6)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
6of6
STEP 6
- Assemble Shade and Diffuser
A. Place the Diffuser (K) and the Steel Collar (I) over the
Socket as shown. Secure by threading the Socket
Collar (H) onto the Socket. Hand tighten until snug.
B. Place the Shade (J) onto the Diffuser (K).
Figure 7
Socket Collar
Shade
Steel Collar
Socket
Figure 8
STEP 7
- Install Bulb and Bulb Shield
A. This fixture uses Frosted G9 Halogen Bulbs (supplied).
Maximum 75 watts.
B. Insert bulb and seat properly into place.
C. Screw Bulb Shield (F) onto the Socket and hand tighten
until snug.
Do not touch the bulb with bare hands
use a cloth or glove.
Your fixture is now assembled and ready to use. Enjoy!
IMPORTANT:
Assembly Instruction Sheet #IS-UPBY8701WT
For Style UPBY8701WT
Diffuser
G9 Bulb
Socket
Bulb Shield
2014 QuoizelInc. July2014
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .