Quoizel SHT8801K Sheath - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2013 QuoizelInc.
3of4
STEP 1 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting Hole Figure 1
Assembly Instruction Sheet #IS-SHT8801K
For Style SHT8801K
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
July2013
STEP 2 Make Wire Connections -
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 2
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Figure 3
Figure 4
STEP 3 - Attach Fixture Body to Crossbar
A. Place the Backplate of the Fixture Body (C) onto the
Crossbar. Line up the holes on the Backplate to the
mounting holes on the “U”-Crossbar. Secure by
threading the Mounting Screws (B) into the mounting
holes on the “U”-Crossbar. Hand tighten until snug.
Mounting Screw
“U”-Crossbar
Fixture
Body
Backplate