Quoizel Q1560PN Quoizel Portable Lamp - Manual (Page 6)

Assembly Instruction Sheet #IS-Q1560PN
For Style Q1560PN
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
6of7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. August2013
For Fixed Wall Mount
Figure 9
STEP 9
- Install Mounting Screw
A. Thread the Mounting Screws (B) into the holes on the
Crossbar (A). Pass the Lock Washers (C) over the
Mounting Screws (B) and thread the Hex Nuts (D) onto
the screws. Hand tighten until snug.
Crossbar
Mounting Screw
Lock Washer
Hex Nut
STEP 10 Install Inner Backplate to Outlet Box
-
A. Refer to Step 2 to complete the mounting screw
installation.
B. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Figure 10
STEP 11 Make Wire Connections
-
A. Pull out the Supply Wire with Plug End and cut down it,
left 6” cord for the Wire Connection.
B. Insert Plug Insert to cover the Exiting Hole as shown.
C. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to
Ribbed side from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box
to Smooth side from fixture.
F. Twist connectors until wires are tightly joined together.
G. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 12
White wire from supply
Ribbed side
from fixture
Black wire from supply
(or Red)
Smooth side
from fixture
Supply Wire
with Plug End
Plug Insert
Exiting Hole
Figure 13
Figure 11
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting
Hole