Quoizel Q1560BN Quoizel Portable Lamp User Manual

Page 4

Assembly Instruction Sheet #IS-Q1560BN

For Style Q1560BN

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

4of7

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

2013 QuoizelInc.

August2013

STEP 4

- Attach Fixture Body to Mounting

Screw

A. Place the Backplate of the Fixture Body (F) over the

(O) and secure with Mounting

Balls (E). Hand tighten until snug.

Short Mounting Screw

Mounting Ball

Backplate

Figure 4

STEP 5

Attach Cord Cover Backplate and

Cord Cover

Locate the Cord Cover Backplate ( ) To position the Cord

Cover Backplate ( ) measure approx 12 ½ inches down
from the base of the Backplate Mark the points from the
holes on the Cord Cover Backplate ( ) for Wall Anchors ( ).

B. Using a portable hand drill, drill proper holes from the marks

in the wall surface for the Wall Anchors (K)

Locate the

Wall Anchors (K) and place into the holes in the wall surface

C. Place the Cord Cover Backplate (L) and match the holes with

the Wall Anchors (K)

Secure it by threading the Self-tapping

Screws (J) into the Wall Anchors (K) Hand tighten until snug.

D. Position the Supply Wire inside of the Cord Cover Backplate

(L) so that it will not be pinched. Locate the Cord Cover (M)
and secure it to the Cord Cover Backplate (L) by pressing it
over the Backplate.

Figure 5

Backplate

½”

Cord Cover

Cord Cover Backplate

Wall Anchor

Supply Wire
with Plug End

Self-tapping Screw