Quoizel ZE9363K Zen - Manual (Page 2)

STEP 1 :
a. Place the Socket Assembly onto the top end of the Base
Assembly as shown. Secure them together by threading
the Finial with Nipple into the Hex Coupling on the bottom
center of the Socket Assembly. Hand tighten until snug.
STEP 2 :
a. Thread the Hex Nut end of the Nipple with Hex Nut (Long)
into the Hex Coupling on the top center of the Junction
Box. Using pliers, thread the Hex Nut against the Hex
Coupling and tighten until snug.
b. Pass the Spacer Tube, the Check Ring, the center hole of
the Shade and the Diffuser over the top end of the Nipple
(Long). Secure by threading the Finial onto the Nipple and
hand tighten until snug.
Socket Assembly
2 OF 2
ASSEMBLY INSTRUCTIONS STYLE NUMBER ZE9363K :
STEP 3
.
:
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Your assembly is completed now. Retain this sheet for future reference.
Base Assembly
Hex Coupling
Finial with
Nipple
Nipple with Hex
Nut (Long)
Hex Coupling
Junction Box
Spacer Tube
Check Ring
Shade
Diffuser
Finial