Quoizel VVSY9358AB Vivid Collection Southway - Manual

Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax
631.231.7102
www.quoizel.com
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-VVSY9358AB
For Styles VVSY9358AB 6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc. April2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Package Contents
A
B
C
C
D
D
E
E
Finial
x 1
Shade
x 1
Socket
Assembly
x 1
STEP 1 Install Rods, Socket Assembly
to Base
-
A. The spring cord between the Socket
Assembly (C) and the Rod with
Connector (D) is not adjustable. Thread
the Socket Assembly (C) to the Rod with
connector (D) directly and hand tighten
until snug.
B. Thread the Rod with Connector (D), the
Rod (E) and the Base (F) together as
shown.
F
se
Hand tighten until snug.
Pull the cord from the Base ( ) as
you assemble the parts together to
remove the excess cord between parts.
Figure 1
STEP 2 Install Shade -
A. Attach the Shade (B) over the nipple
on the top center of the Socket
Assembly (C) and secure with the
Finial(A). Hand tighten until snug.
Figure 2
B
C
A
F
F
Rod with
Connector
x 1
Rod
x 1
Base
x 1
STEP 3 Install Bulb -
A. This fixture uses standard bulb with
medium base . Maximum 75 watts.
B. Insert bulb and screw snugly into
place.
Your fixture is now assembled and
ready to use. Enjoy!
Figure 3
Bulb
Tools Required: None.
Bulb Recommended:
Estimated Assembly Time:
Preparation:
(3) Medium Base 75W Maximum, Alternate bulb (3) 19W CFL
15-20 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams
below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or
operate the fixture. Contact customer service for replacement parts.