Quoizel VVAM9362BN Vivid Collection Ambrose User Manual
Warnings and cautions, Package contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax
631.231.7102
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-VVAM9362
For Styles VVAM9362BN,VVAM9362PN
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
2014 QuoizelInc.
April2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Package Contents
A
B
C
D
E
Finial
x 1
Shade
x 1
Socket
Assembly
x 1
Center
Column
x 1
Rod with
Switch
x 1
STEP 1
Install Rods, Center Column and
Socket Assembly
-
A. The spring cord between the Socket
Assembly (C) and the Center Column (D)
is not adjustable. Thread the Socket
Assembly (C) to the Center Column (D)
directly and hand tighten until snug.
B. Thread the Center Column (D), the Rods
(E/F) and the Base (G) together as shown.
Pull the cord from the Base (G) as you
assemble these parts together to remove
the excess cord between parts. Hand
tighten until snug.
Figure 1
C
D
STEP 2
Install Shade
-
A. Attach the Shade (B) over the nipple
on the top center of the Socket
Assembly (C) and secure with the
Finial (A). Hand tighten until snug.
Figure 2
B
C
A
F
Rod
x 1
G
Base
x 1
E
F
G
STEP 3
Install Bulb
-
A. This fixture uses standard bulb with
medium base . Maximum 75 watts.
B. Insert bulb and screw snugly into
place.
Your fixture is now assembled and
ready to use. Enjoy!
Figure 3
Bulb
Tools Required: None.
Bulb Recommended:
Estimated Assembly Time:
Preparation:
(3) Medium Base 75W Maximum, Alternate bulb (3) 19W CFL
15-20 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams
below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or
operate the fixture. Contact customer service for replacement parts.