Quoizel TF7110Z Tiffany User Manual
Page 3
3of3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2013 QuoizelInc.
STEP 1
- Install Shade
A. Attach the Shade (B) to the Socket Assembly. Pass the
Bolts on the Socket Assembly through the Small Holes
on the bottom of the Shade (B). Secure by threading the
Lock Balls (C) onto the Bolts. Hand tighten until snug.
Figure 1
STEP 2
- Install Bulb
A. This fixture uses T3 Bi Pin bulb. Maximum 50 watts.
B. Insert bulb and push snugly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
May2014
Assembly Instruction Sheet #IS-TF7110Z
For Style TF7110Z
Figure 3
STEP 3
Install Diffuser to Shade
-
A.
Your fixture is now assembled and ready to use.
Enjoy!
Pass the Gaps on the Diffuser (D) over the Tabs on the
Shade (B) and then rotate the Diffuser (D). Do not free
your hands until the diffuser is seated onto the tabs.
Tab
Shade
Diffuser
Gap
Figure 2
Socket Assembly
Shade
Lock Ball
Bolt
Small Hole
Socket
Bulb
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.