Quoizel TF6821VB Tiffany - Manual (Page 2)

2 OF 2
STYLE NUMBER: TF6821VB
INSTALLATION INSTRUCTIONS
STEP 1:
a. Thread the Socket Assembly onto the top end of the
Center Column and hand-tighten until snug.
b. Place the Nipple through the Base, screw into the
bottom end of the Center Column. Tighten until snug.
c. Place the Flat Washer and the Lock Washer over the
end of the Nipple. Secure by threading the Thumb Nut
onto the Nipple. Hand-tighten until snug.
STEP 2:
a. Remove Knurled Nuts from the Nipple with Knurled
Nuts.
b. Screw the Hex Nut end of the Nipple into the Hex
Coupling on the top center of the Socket Assembly. By
using pliers, thread the Hex Nut against the Hex
Coupling and hand tighten until snug.
c. Place the Spacer Tube and the Check Ring over the
Nipple. Secure them by threading small Knurled Nut
back onto the Nipple. Hand-tighten until snug.
d. Thread the big Knurled Nut onto the top end of the
Nipple. Adjust it to proper location for the Shade and
Finial.
e. Place the Shade over the top end of the Nipple and
secure with the Finial. Hand-tighten until snug.
Hex Coupling
Check Ring
Nipple with
Knurled Nuts
Socket
Assembly
Center Column
Shade
Finial
STEP 3:
a. Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Your assembly is completed now. Retain this sheet for future reference.
Socket
Assembly
Base
Nipple
Flat Washer
Thumb Nut
Lock Washer
Supply Wire
Spacer Tube
Hex Nut