Quoizel TF1672TWT Tiffany - Manual (Page 4)

4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2013 QuoizelInc.
Assembly Instruction Sheet #IS-TF1672TWT
For Style TF1672TWT
September2013
STEP 1 Assemble Side Arm to Base -
A. Line up the Hole on the Side Arm (F) and the Mounting
Hole on the Base (B), secure by thread Lock Screw (G)
into the Mounting Hole, hand tighten until snug.
Figure 1
Lock
Screw
Base
STEP 2 Assemble Stem to Base -
A. Thread the Short Nipple end of Stem (A) into Coupling
on the top of Base (B) as shown. Hand tighten until
snug.
Figure 2
Stem
Coupling
Figure 3
Stem
Shade
Knurled Nut
Finial
STEP 4 - Install Bulb
A. This fixture uses standard bulb with medium base .
Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 4
Bulb
Socket
Side Arm
Hole
Mounting Hole
Base
STEP 3 Install Shade -
A. Thread the Knurled Nut (E) onto the top end of the Stem
(A) and adjust to proper location for the Shade (D) and
the Finial (C).
B. Place the Shade (D) over the Stem (A) and secure with
the Finial (C). Hand tighten until snug. Make sure the
edge of Shade (D) place on the Side Arm (F) properly.
Side Arm
Edge