Quoizel MC1689T Mica User Manual
Page 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
3of3
Assembly Instruction Sheet #IS-MC1689T
For Style MC1689T
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
STEP 1 - Install Stem
A. Thread the Hex Nut end of Stem with Cap (E) into the
Coupling on the top of Base (F). Before you tighten the
stem, fit the Shade (D) onto the top of the stem, adjust
the stem to line up the long edge of the Shade (D) and
the long edge of the base (F). And then remove the
Shade (D) from the stem. Tighten the Set Screw on the
side of the Coupling with screwdrivers and tighten the
Hex Nut on the stem against the Coupling to secure the
Stem. Hand tighten until snug.
Figure 1
STEP 2
Assemble Shade
-
A. Place the spiders of the Shade (D) into the Gaps on the
cap. Secure by threading the Hex Nut (C) onto the
Stem. Tighten until snug.
B. Place the Cap (B) onto the top end of the Stem (E) and
secure with the Finial (A). Hand tighten until snug.
Figure 2
Base
Stem with Cap
Hex Coupling
Stem with Cap
Shade
Finial
2013 QuoizelInc.
December2013
Cap
Hex Nut
Spider
STEP 3
Install Bulb
-
A. This fixture uses standard bulbs with medium screw
bases. Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 3
Socket
Bulb
Gap
Gap
Set Screw