Quoizel TF9404M Tiffany - Manual (Page 2)

CHECK RING
SPACER
FINIAL
KNURL NUT
SHADE CENTER
HOLE
SHADE
BULB CLUSTER
BODY bulb qty
depends on style
( .
)
WASHER
ROUND TIFFANY STYLE SHADES
SQUARE TIFFANY SHADE AND BASE WITH 2 LIGHT “S” CLUSTER
Remove the KNURLED NUT from the STEM and
thread the end of STEM into COUPLING on the top
center of the socket body. Hand tighten until snug.
Position SPACER and CHECK RING downwards over
the top end of the STEM and thread the KNURLED NUT
until snug to secure them. Locate WASHER (*) and
SHADE over top end of STEM. Secure them by threading
the KNURLED NUT (*) onto the top end of STEM. Hand
tighten until snug. Proceed to thread FINIAL onto top
end of the STEM and tighten until snug. Install bulb(s)
referring to fixture markings and/or labels for maximum
wattage.
Thread the end of the SOCKET BODY ASSEMBLY into
the mounting hole on the top of the BASE. Tighten them
together and make sure the direction of SOCKETS are
in-line with the edge of the BASE.
Next, follow the instructions else where on this
instruction sheet describing how to install your tiffany
style shade.
STEM with
KNURLED NUT
IS-687
Revised 2006-8-29
RETAIN THIS SHEET FOR FUTURE REFERENCE
SHADE
HARP
HARP CLIP
FINIAL
SHADE
BASIC STYLE SHADES
Locate the HARP and squeeze the ends of it into the
HARP SADDLE. Slide the small cups over the harp ends
and saddle, securing it in place. Next, install the bulb(s)
referring to the fixture markings and /or labels for
maximum wattage. Place the SHADE over the top of the
HARP. Locate and thread the finial onto the top end of
the HARP. Tighten the FINIAL until it is snug to secure
the SHADE.
NOTE: A PART DESCRIPTION FOLLOWED BY AN ASTERISK (*)
MAY OR MAY NOT BE INCLUDED IN YOUR STYLE OF LUMINAIRE.
NOTE: A PART DESCRIPTION FOLLOWED BY AN ASTERISK (*)
MAY OR MAY NOT BE INCLUDED IN YOUR STYLE OF LUMINAIRE. NOTE: A PART DESCRIPTION FOLLOWED BY AN ASTERISK (*)
MAY OR MAY NOT BE INCLUDED IN YOUR STYLE OF LUMINAIRE.
*
*
MAKE SURE
SOCKETS
ARE
PARALLEL
WITH
BASE.
SOCKET BODY
ASSEMBLY
BASE
Incorrect
base/ socket/ shade Orientation
Correct
base/ socket/ shade Orientation
SOCKET