Quoizel TF1180TVA Asheville - Manual (Page 3)

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
STEP 1
- Attach Spacer Tube, Check Ring and
Nipple with Knurled Nuts to Base
A. Remove Knurled Nuts from the Nipple. Screw one end
of the Nipple into the Hex Coupling on the top center of
the Base (F). Hand tighten until snug.
B. Place the Spacer Tube (D) and Check Ring (B) over the
top end of the Nipple. Secure by threading the Small
Knurled Nut onto the Nipple. Hand tighten until snug.
C. Thread the Big Knurled Nut onto the top end of the
Nipple and adjust to proper location for the Shade (A)
Figure 1
Small Knurled Nut
STEP 2
- Attach Shade and Finial
A. Place the Shade (A) over the top end of the Nipple.
Secure by threading the Finial (C) onto the Nipple.
Hand tighten until snug.
Finial
Figure 2
Nipple
Shade
Nipple
STEP 3 Install Bulb
-
A. This fixture uses standard bulb with medium base .
Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Your table lamp is now assembled and ready to use.
Enjoy!
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc. August2011
3of3
Assembly Instruction Sheet #IS-TF1180TVA
For Style TF1180TVA
Base
Big Knurled Nut
Hex Coupling
Spacer Tube
Check Ring
Base
Figure 3
Bulb
Socket