Quoizel TRG1716OZ Trilogy User Manual
Page 3
Assembly Instruction Sheet #IS-TRG1716OZ
For Style TRG1716OZ
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
3of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2014 QuoizelInc.
May2014
STEP 1
Install Shade
-
A. Attach the Shade Holder (I) onto the end of the Side
Arms. Secure by threading the Lock Balls (J) onto the
ends of the Side Arms. Hand tighten until snug.
B. Place the Shade (H) over the Fixture Body (F), seat
onto the Shade Holder (I). Proceed to place the Ring
(G) over the Fixture body (F), seat onto the top edge of
the Shade (H).
Side Arm
Fixture Body
Figure 1
Shade Holder
Shade
Lock Ball
Ring
Figure 2
Crossbar
Mounting Screw
Lock Washer
Hex Nut
STEP 2 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Ceiling
Canopy
STEP 3 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting
Hole
Figure 3