Quoizel TY1716AN Taylor - Manual (Page 2)

PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (3) 100W Type-A medium base bulbs
● Helpful Tools (not included): Wire strippers.
.
STYLE NUMBER: TY1716AN, TY1716WT
INSTALLATION INSTRUCTIONS
STEP 1:
a. Attach the Connectors on the Ring to the bottom of the
Side Arms. Line up mounting holes on the Connectors
and holes on the Side Arms. Using screwdriver, thread
Lock Screws into the mounting holes on Connectors to
secure them together. Hand-tighten until snug.
2 OF 4
Ring
Socket Assembly
Side Arm
Connector
Lock Screw
STEP 2:
a. Screw the Mounting Screws into the Crossbar place
the Lock Washers over the Mounting Screws and
thread the Hex Nuts onto the Mounting Screws as
shown
Secure the position of the Mounting Screws by
tightening the Hex Nuts against the Crossbar
b. Secure the Crossbar to the Outlet Box with Outlet Box
Screws
,
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer